Gray-Green Corrosion Resistant Primers

Generic Type: Alkyl Silicate Inorganic Zinc Rich – two-components

Gloss: Low

Color: Gray-green

Zinc Content: 80% by dry film weight + 2%

Recommended Film Thickness: 2.0 – 4.0 Mils Dry

4.8 – 9.6 Mils Wet

Spread Rate: 332 – 166 sq ft/gal

@ Recommended Dry Film – No Loss

Dry Time: @ 77°F (25°C) & 50% Relative Humidity

To Touch: 30 minutes

To Handle: 30 minutes

To Recoat: 16 hours

Drying times are dependent upon film thickness, temperature

and humidity.

Storage Temperature: 20°F (-7°C) Minimum 100°F (38°C) Maximum

Flash Point: 80°F (26.7°C)

VOC: 4.19 lbs/gal (503 g/l)

See more information:

Zinc Rich Primers

Generic Type: Organic Zinc Rich Epoxy - 3 component.

Color: Gray-green

Gloss: Flat

Zinc Content: 80 ± 2%

Solids By Volume: 53 ± 2%

VOC: 3.30 ± .1 lbs./gal. (mixed)

Flash Point: 60°F Pensky Martin

Mixing: Do not alter proportions. Mix together until smooth,

100S9785B and 100X9786A, then add 100S7387C. Mix

thoroughly with a mechanical agitation until well blended.

Pot Life: 6 - 10 hours @ 77°F (25°C)

Shelf Life: 1 Year

Surface Preparation: Surface must be free of grease, oil, dirt, salts

and other contaminants. Performs well over SSPC-SP6

Commercial Blast Cleaning. For maximum protection for

condensation, splash, or spillage SSPC-SP10 is required.

Application: Conventional or airless spray, brush for touch-up only.

See more information:

Zinc Rich Primers

Color: Gray-green

Gloss: Flat

Zinc Content: 80% ± 2% by dry film weight

Recommended Film Thickness: 2.0 – 4.0 Mils Dry

3.5 – 7.1 Mils Wet

Spread Rate: 451 – 225 sq ft/gal

@ Recommended Dry Film – No Loss

Dry Time: @ 77°F (25°C) & 50% Relative Humidity

To Touch: 30 minutes

To Handle: 30 minutes

To Topcoat: 16 hours

Drying times are dependent upon film thickness, temperature

and humidity.

Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C) Maximum

Flash Point: 64°F (18°C)

Viscosity: 90 – 95 KU @ 77°F (25°C) mixed

VOC: 2.086 lbs/gal (249 g/l)

See more information:

Zinc Rich Primer, Organic

Gray-Green Corrosion Resistant Coatings

Sumter Coatings offers gray-green corrosion resistant primers and coatings for structural steel. We also offer custom and metallic coatings. Most of our primers are in stock, which means quick shipments to our customers. Contact us for more information.

Click here to Request More Information Online
or call us today at 1.888.471.3400