Gray Corrosion Resistant Primers

Gloss: 0 – 5 units @ 60° Maximum
Use: Protective / Decorative
Color: Red and Gray
Recommended Film Thickness: 2.0 – 4.0 Mils Dry
4.0 – 8.0 Mils Wet
Spread Rate: 400 – 200 sq ft/gal
@ Recommended Dry Film – No Loss
Dry Time: @ 4.0 Mils Wet
@ 77°F (25°C) & 50% Relative Humidity
To Touch: 15 minutes
Tack Free: 30 minutes To Handle: 60 minutes
To Topcoat: 30 minutes alkyd topcoats
2 hours epoxy or urethane
Drying times are dependent upon film thickness, temperature and humidity.
Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C) Maximum Flash Point: 45°F (7°C) SETAFLASH
Viscosity: 65 – 70 KU @ 77°F (25°C)
VOC: 100R2231 2.00 lbs/gal (240 g/l)
100D2230 2.00 lbs/gal (240 g/l)

See more information:

Environmental Coating Solutions

Gloss: Flat 0 – 5 units @ 60° Maximum
Use: Protective / Decorative
Color: Red, Dark Gray and Light Gray
Recommended Film Thickness: 2.0 – 4.0 Mils Dry 4.4 – 8.8 Mils Wet
Spread Rate: 363 – 181 sq ft/gal
@ Recommended Dry Film – No Loss Dry Time: @ 4.5 Mils Wet @ 77°F (25°C) & 50% Relative Humidity
To Touch: 15 minutes
Tack Free: 45 minutes
To Handle: 60 minutes
To Topcoat: Overnight or 8 hours
Drying times are dependent upon film thickness, temperature and humidity.
Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C) Maximum
Flash Point: 65°F (18°C) SETAFLASH
Viscosity: 60 – 65 KU @ 77°F (25°C)
VOC: 100R7713 3.47 lbs/gal (416 g/l)
100D7714 3.44 lbs/gal (413 g/l)
100D7720 3.25 lbs/gal (390 g/l)

See more information:

Rust Inhibitive & Protective Primers

Gloss: Flat 0 – 5 units @ 60° Maximum

Use: Protective / Decorative

Color: Red, Dark Gray and Light Gray

Recommended Film Thickness: 2.0 – 4.0 Mils Dry

4.4 – 8.8 Mils Wet

Spread Rate: 363 – 181 sq ft/gal

@ Recommended Dry Film – No Loss

Dry Time: @ 4.5 Mils Wet @ 77°F (25°C) & 50% Relative Humidity

To Touch: 15 minutes

Tack Free: 45 minutes

To Handle: 60 minutes

To Topcoat: Overnight or 8 hours

Drying times are dependent upon film thickness, temperature and humidity.

Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C) Maximum

Flash Point: 65°F (18°C) SETAFLASH

Viscosity: 60 – 65 KU @ 77°F (25°C)

VOC: 100R7713 3.47 lbs/gal (416 g/l) 100D7714 3.44 lbs/gal (413 g/l) 100D7720 3.25 lbs/gal (390 g/l)

See more information:

Inhibitive Shopcoat Primers

Gloss: Low sheen – 5 – 10 units @ 60° Maximum

Use: Protective / Decorative

Color: Red and Dark Gray

Recommended Film Thickness: 2.0 – 3.0 Mils Dry 4.1 – 6.2 Mils Wet

Spread Rate: 387 – 258 sq ft/gal

@ Recommended Dry Film – No Loss

Dry Time: @ 4.1 Mils Wet

@ 77°F (25°C) & 50% Relative Humidity

To Touch: 15 minutes

Tack Free: 45 minutes

To Handle: 60 minutes

To Topcoat: Overnight or 8 hours

Drying times are dependent upon film thickness, temperature and humidity.

Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C) Maximum

Flash Point: 50°F (10°C) TCC

VOC: 100R0984 3.23 lbs/gal (387 g/l) 100D0985 3.29 lbs/gal (397 g/l)

See more information:

Rust Inhibitive Primers

Gloss: Flat 0 – 10 units @ 60° Maximum

Use: Protective / Decorative

Color: Red and Gray

Recommended Film Thickness: 2.0 – 4.0 Mils Dry 3.4 – 6.7 Mils Wet

Spread Rate: 476 – 238 sq ft/gal

@ Recommended Dry Film – No Loss

Dry Time: @ 4.5 Mils Wet

@ 77°F (25°C) & 50% Relative Humidity

To Touch: 30 minutes

Tack Free: 90 minutes

To Handle: 120 minutes

To Topcoat: Overnight or 8 hours

Drying times are dependent upon film thickness, temperature and humidity.

Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C) Maximum

Flash Point: 105°F (40°C) SETAFLASH

Viscosity: 85 – 95 KU @ 77°F (25°C)

VOC: 100R8813 2.63 lbs/gal (315 g/l) 100D8814 2.64 lbs/gal (316 g/l)

See more information:

Heavy Duty, Corrosion Resistant Primers

Gloss: Flat 0 – 5 units @ 60° Maximum

Use: Protective / Decorative

Color: Red and Gray Recommended Film Thickness: 2.0 – 4.0 Mils Dry 3.6 – 7.3 Mils Wet

Spread Rate: 440 – 220 sq ft/gal @ Recommended Dry Film – No Loss

Dry Time: @ 4.5 Mils Wet @ 77°F (25°C) & 50% Relative Humidity

To Touch: 30 minutes

Tack Free: 2 hours

To Handle: 3 hours

To Topcoat: Overnight or 8 hours

Drying times are dependent upon film thickness, temperature and humidity.

Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C)

Maximum Flash Point: 105°F (40°C) SETAFLASH

Viscosity: 85 – 95 KU @ 77°F (25°C)

VOC: 100R9913 2.90 lbs/gal (348 g/l) 100D9914 2.87 lbs/gal (344 g/l) 100W9927 2.80 lbs/gal (336 g/l)

See more information:

Heavy Duty, Corrosion Resistant Primers

Gloss: Flat 0 – 5 units @ 60° Maximum

Use: Protective / Decorative

Color: Red, Gray and White

Recommended Film Thickness: 2.0 – 4.0 Mils Dry 4.0 – 8.0 Mils Wet

Spread Rate: 404 – 202 sq ft/gal @ Recommended Dry Film – No Loss

Dry Time: @ 4.0 Mils Wet @ 77°F (25°C) & 50% Relative Humidity

To Touch: 15 minutes

Tack Free: 30 minutes

To Handle: 60 minutes

To Topcoat: 30 minutes alkyd topcoats 2 hours epoxy or urethane

Drying times are dependent upon film thickness, temperature and humidity.

Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C)

Maximum Flash Point: 45°F (7°C) SETAFLASH

Viscosity: 70 – 75 KU @ 77°F (25°C)

VOC: 100R0027 3.18 lbs/gal (382 g/l) 100D0031 3.14 lbs/gal (408 g/l) 100W0038 3.18 lbs/gal (382 g/l)

See more information:

Universal Protective Primers

USE: Protective / Decorative

WELD-THRU: These primers may be welded through to yield sound welds (tested & approved).

GLOSS: 0 – 5 Units @ 60° Maximum

RECOMMENDED FILM THICKNESS: 1 - 3 Mils Dry 2.0 – 6.0 Mils Wet

SPREAD RATE: Gray 794 - 265 sq ft/gal @ Recommended DFT – No Loss White 804 – 268 sq ft/gal @ Recommended DFT – No Loss

VOC: Gray 3.17 lbs/gal (380 g/l) White 3.14 lbs/gal (377 g/l)

See more information:

Universal Primers

Generic Types: Polyamide Epoxy –

Two Components Gloss: Semi-Gloss 30 – 50 units @ 60° 

Use: Protective / Decorative

Color: White, Gray (A selection of custom colors is also available.)

Recommended Film Thickness: 5.0 – 7.0 Mils Dry 6.8 – 9.5 Mils Wet

Spread Rate: 236 – 169 sq ft/gal @ the recommended dft

Dry Time: @ 77°F (25°C) & 50% Relative Humidity

To Touch: 1 – 2 hours

To Handle: 6 – 8 hours

To Re-coat: 6 – 10 hours (Or, wet-on-wet after one hour)

To Topcoat: 6 – 10 hours

Drying times are dependent upon film thickness, temperature and humidity.

Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C)

Maximum Flash Point: 70°F (20°C)

Viscosity: 90 – 100 KU (activated) @ 77°F (25°C)

VOC: 1.86 (223 g/l) ± 1% (activated)

See more information:

Universal Primers

Generic Types: Polyamide Epoxy –

Two Components Gloss: 15 – 35 units @ 60°

Use: Protective / Decorative

Color: Gray

Recommended Film Thickness: 2.5 Mils Dry 4.9 Mils Wet

Spread Rate: 323 sq ft/gal @ the recommended dft, no loss

Dry Time: @ 77°F (25°C) & 50% Relative Humidity

To Touch: 50 minutes

To Handle: 120 minutes

To Re-coat: wet-on-wet after 30 minutes or 2 – 72 hours including polyurethanes

Drying times are dependent upon film thickness, temperature and humidity.

Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C)

Maximum Flash Point: 45°F (7°C)

Viscosity: 20” – 25” #3 Zahn (activated) @ 77°F (25°C)

VOC: 3.44 (412 g/l) ± 1% (activated)

See more information:

Two-Part Epoxy Primers

Generic Types: Polyamide Epoxy –

Two Components Gloss: 15 – 35 units @ 60°

Use: Protective / Decorative

Color: Gray

Recommended Film Thickness: 2.5 Mils Dry 4.9 Mils Wet

Spread Rate: 323 sq ft/gal @ the recommended dft, no loss Dry Time: @ 77°F (25°C) & 50% Relative Humidity

To Touch: 50 minutes

To Handle: 120 minutes

To Re-coat: wet-on-wet after 30 minutes or 2 – 72 hours including polyurethanes

Drying times are dependent upon film thickness, temperature and humidity.

Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C) Maximum

Flash Point: 45°F (7°C)

Viscosity: 20” – 25” #3 Zahn (activated) @ 77°F (25°C)

VOC: 3.44 (412 g/l) ± 1% (activated)

See more information:

Water Based Primers

USE: Protective / Decorative

GLOSS: 0 –5 Units @ 60° Maximum

RECOMMENDED FILM THICKNESS: 2.0 – 3.0 Mils Dry 5.4 – 8.0 Mils Wet

SPREAD RATE: 298 - 199 Sq Ft/Gal @ Recommended DFT – No Loss

VOC: 1.5 lbs/gal (180 g/l) ± 1%

See more information:

Water Based Primers

Gloss: 10 units Maximum @ 60° Minimum

Use: Protective / Decorative

Color: Red and Gray

Recommended Film Thickness: 2.0 – 3.0 Mils Dry 3.3 – 5.0 Mils Wet

Spread Rate: 100R8822 485 – 323 sq ft/gal 100D8823 477 – 318 sq ft/gal @ Recommended DFT – No Loss

Dry Time: @ 77°F (25°C) & 50% Relative Humidity

To Touch: 30 minutes

Tack Free: 90 minutes

To Handle: 120 minutes

To Topcoat: Overnight or 8 hours

Drying times are dependent upon film thickness, temperature and humidity.

Flash Point: 105°F (40°C) TCC

Viscosity: 85 – 95 KU @ 77°F (25°C)

VOC: 100R8822 2.08 lbs/gal (250 g/l) 100D8823 2.04 lbs/gal (245 g/l)

See more information:

Inhibitive Primers

USE: Protective / Decorative

GLOSS: 0 –5 Units @ 60° Maximum

SURFACE PREPARATION: Solvent clean per SSPC-SP 1 followed by SSPC-SP 2/3

RECOMMENDED FILM THICKNESS: 2.0 – 3.0 Mils Dry 5.1 – 7.7 Mils Wet

SPREAD RATE: 311 - 208 Sq Ft/Gal @ Recommended DFT – No Loss

VOC: .904 lbs/gal (108 g/l) ± 1%

See more information:

Water Based Primers

Gray Corrosion Resistant Coatings

Sumter Coatings offers gray corrosion resistant primers and coatings for structural steel. We also offer custom and metallic coatings. Most of our primers are in stock, which means quick shipments to our customers. Contact us for more information.

Click here to Request More Information Online
or call us today at 1.888.471.3400