Red Corrosion Resistant Primers

Gloss: Flat 0 – 5 units @ 60° Maximum

Use: Protective / Decorative

Color: Red, Dark Gray and Light Gray

Recommended Film Thickness: 2.0 – 4.0 Mils Dry

 4.4 – 8.8 Mils Wet

Spread Rate: 363 – 181 sq ft/gal

@ Recommended Dry Film – No Loss

Dry Time: @ 4.5 Mils Wet

 @ 77°F (25°C) & 50% Relative Humidity

To Touch: 15 minutes

Tack Free: 45 minutes

To Handle: 60 minutes

To Topcoat: Overnight or 8 hours

Drying times are dependent upon film thickness, temperature and humidity.

Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C) Maximum

Flash Point: 65°F (18°C) SETAFLASH

Viscosity: 60 – 65 KU @ 77°F (25°C)

VOC: 100R7713 3.47 lbs/gal (416 g/l)

100D7714 3.44 lbs/gal (413 g/l)

100D7720 3.25 lbs/gal (390 g/l)

See more information:

Rust Inhibitive & Protective Primers

 

Gloss: Low sheen – 5 – 10 units @ 60° Maximum

Use: Protective / Decorative

Color: Red and Dark Gray

Recommended Film Thickness: 2.0 – 3.0 Mils Dry

 4.1 – 6.2 Mils Wet

Spread Rate: 387 – 258 sq ft/gal

@ Recommended Dry Film – No Loss

Dry Time: @ 4.1 Mils Wet

 @ 77°F (25°C) & 50% Relative Humidity

To Touch: 15 minutes

Tack Free: 45 minutes

To Handle: 60 minutes

To Topcoat: Overnight or 8 hours

Drying times are dependent upon film thickness,

temperature and humidity.

Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C) Maximum

Flash Point: 50°F (10°C) TCC

VOC: 100R0984 3.23 lbs/gal (387 g/l)

100D0985 3.29 lbs/gal (397 g/l)

See more information:

Rust Inhibitive & Protective Primers

Gloss: Flat 0 – 10 units @ 60° Maximum

Use: Protective / Decorative

Color: Red and Gray

Recommended Film Thickness: 2.0 – 4.0 Mils Dry

 3.4 – 6.7 Mils Wet

Spread Rate: 476 – 238 sq ft/gal

@ Recommended Dry Film – No Loss

Dry Time: @ 4.5 Mils Wet

 @ 77°F (25°C) & 50% Relative Humidity

To Touch: 30 minutes

Tack Free: 90 minutes

To Handle: 120 minutes

To Topcoat: Overnight or 8 hours

Drying times are dependent upon film thickness, temperature

and humidity.

Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C) Maximum

Flash Point: 105°F (40°C) SETAFLASH

Viscosity: 85 – 95 KU @ 77°F (25°C)

VOC: 100R8813 2.63 lbs/gal (315 g/l)

100D8814 2.64 lbs/gal (316 g/l)

See more information:

Heavy Duty, Corrosion Resistant Primers

Gloss: Flat 0 – 5 units @ 60° Maximum

Use: Protective / Decorative

Color: Red and Gray

Recommended Film Thickness: 2.0 – 4.0 Mils Dry

 3.6 – 7.3 Mils Wet

Spread Rate: 440 – 220 sq ft/gal

@ Recommended Dry Film – No Loss

Dry Time: @ 4.5 Mils Wet

 @ 77°F (25°C) & 50% Relative Humidity

To Touch: 30 minutes

Tack Free: 2 hours

To Handle: 3 hours

To Topcoat: Overnight or 8 hours

Drying times are dependent upon film thickness, temperature

and humidity.

Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C) Maximum

Flash Point: 105°F (40°C) SETAFLASH

Viscosity: 85 – 95 KU @ 77°F (25°C)

VOC: 100R9913 2.90 lbs/gal (348 g/l)

100D9914 2.87 lbs/gal (344 g/l)

100W9927 2.80 lbs/gal (336 g/l)

See more information:

Heavy Duty, Corrosion Resistant Primers

Gloss: Flat 0 – 5 units @ 60° Maximum

Use: Protective / Decorative

Color: Red, Gray and White

Recommended Film Thickness: 2.0 – 4.0 Mils Dry

 4.0 – 8.0 Mils Wet

Spread Rate: 404 – 202 sq ft/gal

@ Recommended Dry Film – No Loss

Dry Time: @ 4.0 Mils Wet

 @ 77°F (25°C) & 50% Relative Humidity

To Touch: 15 minutes

Tack Free: 30 minutes

To Handle: 60 minutes

To Topcoat: 30 minutes alkyd topcoats

 2 hours epoxy or urethane

Drying times are dependent upon film thickness, temperature

and humidity.

Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C) Maximum

Flash Point: 45°F (7°C) SETAFLASH

Viscosity: 70 – 75 KU @ 77°F (25°C)

VOC: 100R0027 3.18 lbs/gal (382 g/l)

100D0031 3.14 lbs/gal (408 g/l)

100W0038 3.18 lbs/gal (382 g/l)

See more information:

Universal Protective Primers

Generic Type: Red Oxide Waterbase (196R7713)

Colors: Red and Gray

Gloss: 0 – 5 Maximum

Weight Per Gallon: 9.71 ± .2 lbs./gal (Red)

 9.80 ± .2 lbs./gal (Gray)

Viscosity: 65 – 75 KU

Solids By Weight: 34.34 ± 1.5% (Red)

 33.06 ± 1.5% (Gray)

Solids By Volume: 21.80 ± 1.5% (Red)

 21.74 ± 1.5% (Gray)

VOC: 2.38 ± 1% lbs./gal. (Red)

 2.38 ± 1% lbs./gal. (Gray)

See more information:

Water Based Primers

Gloss: 10 units Maximum @ 60° Minimum

Use: Protective / Decorative

Color: Red and Gray

Recommended Film Thickness: 2.0 – 3.0 Mils Dry

 3.3 – 5.0 Mils Wet

Spread Rate: 100R8822 485 – 323 sq ft/gal

100D8823 477 – 318 sq ft/gal

@ Recommended DFT – No Loss

Dry Time: @ 77°F (25°C) & 50% Relative Humidity

To Touch: 30 minutes

Tack Free: 90 minutes

To Handle: 120 minutes

To Topcoat: Overnight or 8 hours

Drying times are dependent upon film thickness,

temperature and humidity.

Flash Point: 105°F (40°C) TCC

Viscosity: 85 – 95 KU @ 77°F (25°C)

VOC: 100R8822 2.08 lbs/gal (250 g/l)

100D8823 2.04 lbs/gal (245 g/l)

See more information:

Environmental Coating Solutions

Gloss: 0 – 5 units @ 60° Maximum

Use: Protective / Decorative

Color: Red and Gray

Recommended Film Thickness: 2.0 – 4.0 Mils Dry

 4.0 – 8.0 Mils Wet

Spread Rate: 400 – 200 sq ft/gal

@ Recommended Dry Film – No Loss

Dry Time: @ 4.0 Mils Wet

 @ 77°F (25°C) & 50% Relative Humidity

To Touch: 15 minutes

Tack Free: 30 minutes

To Handle: 60 minutes

To Topcoat: 30 minutes alkyd topcoats

 2 hours epoxy or urethane

Drying times are dependent upon film thickness, temperature

and humidity.

See more information:

Environmental Coating Solutions

Red Corrosion Resistant Coatings

Sumter Coatings offers red corrosion resistant primers and coatings for structural steel. We also offer custom and metallic coatings. Most of our primers are in stock, which means quick shipments to our customers. Contact us for more information.

Click here to Request More Information Online
or call us today at 1.888.471.3400