Black Corrosion Resistant Primers

Generic Types: Polyamide Cured – Coal Tar Epoxy. Two-component product.
Gloss: Semi-Gloss
Use: Protective / Decorative
Recommended Film Thickness: 16.0 – 18.0 mils dry, 21.0 – 24.0 mils wet
Apply in two coats @ 8 – 9 mils dry. 10.8 – 12.1 mils wet.
Spread Rate: 66 – 75 sq ft/gal @ the recommended dft
Dry Time: @ 77°F (25°C) & 50% Relative Humidity
To Touch: 3 – 4 hours
Tack Free: 16 – 20 hours
Recoat: If product is to be recoated, you must recoat within 26 hours for good adhesion. After this time, surface should be abraded.
Storage Temperature: 20°F (-7°C) Minimum 110°F (43°C) Maximum
Flash Point: 80°F (20°C)
Brookfield Viscosity: 20 – 40 Poise with #7 Spindle @ 100 rpm
VOC: 1.88 (204 g/l) ± 1% (activated)

See more information:

Environmental Coating Solutions

USE: Protective / Decorative
GLOSS: 17 –21 Units @ 60° Maximum
RECOMMENDED FILM THICKNESS: 2.0 – 3.0 Mils Dry 5.8 – 8.6 Mils Wet
SPREAD RATE: 278 - 186 Sq Ft/Gal @ Recommended DFT – No Loss
VOC: 1.17 lbs/gal (186 g/l) ± 1%

See more information:

Environmental Coating Solutions

Black Corrosion Resistant Coatings

Sumter Coatings offers black corrosion resistant primers and coatings for structural steel. We also offer custom and metallic coatings. Most of our primers are in stock, which means quick shipments to our customers. Contact us for more information.

Click here to Request More Information Online
or call us today at 1.888.471.3400